| |
|
| |
1. Code Product
821-Series
2. Product Name
Baking Polyester
3. Product Description
Specially formulated for electrostatic spray equipment. This product
is based on polyester/melamine and has an excellent flexibility, good
adhesion and hardness. For exterior and interior use.
Note: Always recommended to clean the substrate with metalprep, iron
phosphate.
4. Vehicle Type
Polyester/Melamine
5. Pigment
Titanium dioxide, carbon black, yellow oxide, silicate
6. Use
Aluminum siding, bath room partition, fuser, case for light bulb.
|
|
7. Product Information |
| |
| Color |
Custom |
| Gloss |
38-45 @ 60 degree |
| Dry Films Thickness |
1.2 to 2 mil |
| Volume Solid |
45%-50% |
| Coverage @ 1 mil.meter/imp.
gallon |
17.65 Sq |
| Pot Life |
6 months |
| Catalyst Ratio |
Not Applicable |
| Density |
1.132/lt |
| Sag |
3-4 |
| Viscosity |
18-20 sec Zahn#2 @ 25°C |
| PH |
Acid |
| MEK Rubs |
50 and plus |
| Pencil Hardness |
4H+ |
| Curing Time |
13’ @ 137°C-178°C |
|
| |
|
|
8. Application |
| |
| Application |
Turbo or Conventional Electrostatic |
| Flash Off |
15' |
| Curing Time |
Baked 13’ @ 137°C-178°C |
| Application Temperature |
Room Temperature |
| Recommended Thinner |
None/Hisol-15 |
| Recommended Cleaning |
Xylene |
|
|
|
|
9. Dry and Handling |
| |
| Dry |
After baking, cool down for
15’ |
|
|
|
|
10. Storage and Handling |
| |
| Packaging/Shipping
Weight |
1.132kg/lt. and Container
Weight |
| Flash Point P-M Closed |
27°C |
| Shelf Life Manufacture Date
|
6 Months Subject To Inspection |
| Recommended Storage |
4°C-38°C |
|
|
|
| |
11. Preparation
Surface preparation must be clean, free of dust, dirt, and grease.
12. Application Condition
Room temperature
13. Application Equipment
Turbo electrostatic, conventional electrostatic, airless spray.
14. Recommended Thinning
None or with Hisol-15
15. Application Procedure
» Stir to uniform consistency.
» Apply in wet coat making even
parallel passes. Over each pass
50% to minimize holidays, bare areas and pin holes.
» Excess wet film will cause
sags and runs.
» Store unused material in tightly
closed containers.
» Cleaning application equipment
with xylene.
16. Safety Precautions
» To be
used by professionally trained personnel using proper
safety equipment.
» Use only with adequate ventilation.
» Please refer to Material Safety
Data Sheets (MSDS) provided by
the manufacturer.
[ back to products page ] [ top
]
|
| |
Copyright
© Molecular-Tech Coatings Inc.
|
