| |
|
| |
1. Code Product
765-Series
2. Product Name
Water Reducible Drum Liner
3. Product Description
Specially specially formulated for over 200 MEK rubs, chemical resistance,
and excellent adhesion. No smoke and no smell. This product is intended
to be use as drum lining for vegetables and fruits and high chemical
resistance. Note: Always recommended prepackaging fruits and vegetables
in a plastic bag before packaging in the drum for extra protection.
4. Vehicle Type
Water Reducible Epoxy/Melamine
5. Pigment
Customs Color
6. Use
Drum Liner (Backing Systems)
|
|
7. Product Information |
| |
| Color |
Custom Color |
| Gloss |
65-75 degree @ 60 degree |
| Dry Films Thickness |
1.2 to 2 mil |
| Volume Solid |
32-36% |
| Theoretical Coverage @ 1 mil |
576 Sq./ gl. |
| Sag |
8-10mil |
| Viscosity |
58-63 KU @25°C |
| MEK Rubs |
200 and + |
| Pencil Hardness |
4H+ |
| Curing Time |
8' @ 500 °F can be modified
to suit the application |
|
| |
|
|
8. Application |
| |
| Application |
Airless, Air Mix, HVLP |
| Application Temperature |
45-100°F |
| Recommended Thinner |
None/ EB Reducer |
| Recommended Cleaning |
Lacquer Thinner |
|
|
|
|
9. Storage and Handling |
| |
| Packaging/Shipping
Weight |
1.006kg/lt. and Container
Weight |
| Flash Point P-M Closed |
200°F |
| Shelf Life Manufacture Date
|
6 Months Subject To Re-inspection
Thereafter. |
| Recommended Storage |
39°F TO 100°F |
|
|
|
| |
10. Application Instructions
Surface preparation must be clean, free of dust, dirt, and grease.
11. Application Condition
Room temperature
12. Application Equipment
Conventional air spray gun, air less, air mix and HVLP spray.
13. Recommended Thinning
None or with PNB reducer
14. Application Procedure
» Stir to uniform consistency.
» Apply in wet coat making even
parallel passes over each pass 50%
to minimize holidays, bare areas and pin holes.
» Excess wet film will cause
sags and runs.
» Store unused materials in tightly
closed containers.
» Cleaning application equipment
with lacquer thinner.
15. Safety Precautions
» To be
used by professionally trained personnel using proper
safety equipment.
» Use only with adequate ventilation.
» Please refer to Material Safety
Data Sheets (MSDS) provided by
the manufacturer.
» FDA complied
for food grade when properly cured.
[ back to products page ] [ top
]
|
| |
Copyright
© Molecular-Tech Coatings Inc.
|
